Collapsible content

Inflatable game installation

  1. Prepare the area for the inflatable game:
    • The surface must be flat (maximum 10 degrees), clear and clean.
    • If there is no grass on the ground, install a tarp.
    • For rentals on hard surfaces; the inflatable game must be attached to weights or sandbags. A minimum of six weights/sandbags must be used.
  2. Open and unroll the game, making sure that the canvas is positioned below the middle of the game:
    • The inflatable game must be at least 4 feet from the ceiling and 6 feet from adjacent walls.
  3. Attach the blower to the hose coming out of the game using the fasteners provided:
    • Ensure that the electrical wires are uncoiled and that the blower never operates without being connected to the structure.
    • Children are not allowed to play around the blower.
  4. Plug the blower into an electrical outlet and turn it on.
  5. Close the zippers around the inflatable game.
  6. Secure the inflatable game to the ground using stakes:
    • Always drive the stakes in completely at an angle of approximately 45 degrees towards the underside of the structure.
    • Attach the ropes to the D-rings located at the base of the inflatable structure. Some larger structures require the use of anchors located higher up on the structure.
    • If it is impossible to fix the structure to the ground, put weights on the D-shaped rings.

Uninstalling the game

  1. Clean the inflatable game and dry it if it is wet.
  2. Check that there is no one in the inflatable game.
  3. Turn off and detach the blower from the inflatable game.
  4. Open the zippers and remove the stakes around the inflatable game.
  5. Wait 10 minutes and walk on it (without shoes) to clear your air.
  6. Fold the game in half and repeat step 5.
  7. Fold the game in half, roll it up and reattach it!

How to fold an inflatable structure? Poly Event, 2021, http://www.poly-event.com